v>
国际标准化组织 ISO 树脂标准(ISO
resin standards)汇总
编号
中文名称
英文名称
IEC 60317-0-4
AMD 1-1999
特种绕组线规范 第 0-4 部
分:一般要求 玻璃丝绕包
浸树脂或浸清漆裸扁铜线
或漆包扁筒线 修改 1
Specifications for particular types of
winding wires - Part 0-4: General
requirements - Glass-fibre wound
resin or
varnish impregnated, bare or enamelled
rectangular copper wire; Amendment 1
IEC 60317-0-4
AMD 2-2005
特种绕组线规范 第 0-4 部
分:一般要求.玻璃纤维绕组
浸树脂或浸清漆裸扁铜线
或漆包扁铜线.修改件 2
Specifications for particular types of
winding wires
-
Part 0
-4: General
requirements -
Glass
varnish impregnated, bare or enamelled
rectangular copper wire; Amendment 2
IEC 60317-0-4
Edition 2.1-2000
绕组线特殊类型规范.第
0-4 部分:一般要求.玻璃纤
维缠绕的树脂或清漆浸渍
的,裸露或瓷漆的矩形铜线
Specifications for particular types of
winding wires - Part 0-4: General
requirements - Glass-fibre wound
resin or
varnish impregnated, bare or enamelled
rectangular copper wire
IEC 60317-0-4
Edition 2.2-2006
特种绕组线规范.第 0-4 部
分:一般要求.玻璃纤维绕组
树脂或清漆浸渍裸铜线或
漆包扁铜线
Specifications for particular types of
winding wires
-
Part 0
-4: General
requirements -
Glass
varnish impregnated, bare or enamelled
rectangular copper wire
IEC
60317-0-4-1997
特种绕组线规范.第 0 部分:
一般要求.第 4 节:玻璃纤维
绕组树脂或清漆浸渍裸铜
线或漆包扁铜线
Specifications for particular types of
winding wires - Part 0: General
requirements - Section 4: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled rectangular copper wire
IEC
60317-0-5-2006
特种绕组线规范.第 0-5 部
分:一般要求.玻璃丝编织
的、树脂的或清漆浸渍的、
裸扁铜线或漆包扁铜线
Specifications for particular types of
winding wires - Part 0-5: General
requirements - Glass-fibre braided,
resin or
varnish impregnated, bare or enamelled
rectangular copper wire
IEC 60317-0-6
AMD 1-2006
修改件 1.特种绕组线规范.
第 0-6 部分:一般要求.玻璃
丝绕包浸树脂或浸清漆裸
圆铜线或漆包圆铜线
Amendment 1 - Specifications for particular
types of winding wires - Part 0-6: General
requirements - Glass-fibre wound
resin or
varnish impregnated, bare or enamelled
round copper wireIEC 60317-0-6
Edition 1.1-2007
特种绕组线规范.第 0-6 部
分:一般要求.绕玻璃丝后用
树脂或清漆浸泡的、裸的或
涂瓷釉的铜导线
Specifications for particular types of
winding wires - Part 0-6: General
requirements
- Glass-fibre wound
resin or
varnish impregnated, bare or enamelled
round copper wire
IEC
60317-0-6-2001
特种绕组线规范 第 0-6 部
分：一般要求 玻璃丝绕包
浸树脂或浸清漆裸圆铜线
或漆包圆铜线
Specifications for particular types of
winding wires
-
Part 0
-6: General
requirements -
Glass
varnish impregnated, bare or enamelled
round copper wire
IEC 60317-31
Edition 1.1-1997
特种绕组线规范.第 31 部
分:温度指数为 180 的、玻
璃丝绕包的、树脂或清漆浸
渍的裸线或漆包扁铜线
Specifications for particular types of
winding wires - Part 31: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled rectangular copper wire,
temperature index 180
IEC 60317-32
AMD 2-2005
特种绕组线规范.第 32 部
分:温度指数 155、玻璃纤维
绕组树脂或清漆浸渍的、裸
或漆包扁铜线.修改件 2
Specifications for particular types of
winding wires
- Part 32: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled rectangular copper wire,
temperature index 155; Amendment 2
IEC 60317-32
Edition 1.1-1997
特种绕组线规范.第 32 部
分:温度指数为 155 的、玻
璃丝绕包的、树脂或清漆浸
渍的裸线或漆包扁铜线
Specifications for particular types of
winding wires - Part 32: Glass-fibre wound,
resin or varnish impregnated, bare or
enamelled rectangular copper wire,
temperature index 155
IEC 60317-33
AMD 2-2005
特种绕组线规范.第 33 部
分:温度指数 200、玻璃纤维
绕组树脂或清漆浸渍的、裸
或漆包扁铜线.修改件 2
Specifications for particular types of
winding wires
- Part 33: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled rectangular copper wire,
temperature index 200; Amendment 2
IEC 60317-33
Edition 1.1-1997
特种绕组线规范.第 33 部
分:温度指数为 200 的、玻
璃丝绕包的、树脂或清漆浸
渍的裸线或漆包扁铜线
Specifications for particular types of
winding wires - Part 33: Glass-fibre wound,
resin or varnish impregnated, bare or
enamelled rectangular copper wire,
temperature index 200
IEC 60317-40
AMD 2-2005
特种绕组线规范.第 40 部
分:温度指数 200、玻璃纤维
编织树脂或清漆浸渍的、裸
或漆包扁铜线.修改件 2
Specifications for particular types of
winding wires - Part 40: Glass-fibre braided
resin or varnish impregnated, bare or
enamelled rectangular copper wire, temperature index 200; Amendment 2
IEC
60317-48-1999
特种绕组线规范 第 48 部
分:温度指数 155、玻璃丝绕
包树脂或漆浸渍裸或漆包
圆铜线
Specifications for particular types of
winding wires
- Part 48: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled round copper wire, temperature
index 155
IEC
60317-49-1999
特种绕组线规范 第 49 部
分:温度指数 180、玻璃丝绕
包树脂或漆浸渍裸或漆包
圆铜线
Specifications for particular types of
winding wires
- Part 49: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled round copper wire, temperature
index 180
IEC
60317-50-1999
特种绕组线规范 第 50 部
分:温度指数 200、玻璃丝绕
包树脂或漆浸渍裸或漆包
圆铜线
Specifications for particular types of
winding wires
- Part 50: Glass-fibre wound
resin or varnish impregnated, bare or
enamelled round copper wire, temperature
index 200
IEC 60371-3-4
AMD 1-2006
云母基材绝缘材料规范.第
3 部分:单项材料规范.活页
4:带 B 阶环氧树脂粘合剂
的聚脂薄膜衬底云母纸.修
改件 1
Specifications for insulating materials based
on mica - Part 3: Specifications for
individual materials - Sheet 4: Polyester
film-backed mica paper with a B-stage
epoxy
resin binder; Amendment 1
IEC
60371-3-4-1992
以云母为基材的绝缘材料
规范 第 3 部分:单项材料规
范 活页 4:聚酯薄膜补强 B
阶环氧树脂粘合云母纸
Specification for insulating materials based
on mica; part 3: specifications for individual
materials; sheet 4: polyester film-backed
mica paper with a B-stage epoxy
resinbinder
IEC
60371-3-5-2005
以云母为基材的绝缘材料.
第 3 部分:单项材料规范.活
页 5:后浸渍用玻璃布补强
环氧树脂粘合云母纸
Insulating materials based on mica - Part 3:
Specification for individual materials
-
Sheet 5: Glass-backed mica paper with an
epoxy
resin binder for post-impregnation
(VPI)
IEC 60371-3-6
AMD 1-2006
以云母为基材的绝缘材料
规范.第 3 部分:单项材料规
范.活页 6:带 B 阶环氧树脂
粘合剂的玻璃衬底云母纸
Specification for insulating materials based
on mica
- Part 3: Specifications for
individual materials
- Sheet 6: Glass-backed
mica paper with a B-stage epoxy
resinbinder; Amendment 1
IEC
60371-3-6-1992
以云母为基材的绝缘材料
规范 第 3 部分:单项材料规
Specification for insulating materials based
on mica; part 3: specifications for individual 范 活页 6:补强玻璃布 B 阶
环氧树脂粘合云母纸
materials; sheet 6: glass-backed mica paper
with a B-stage epoxy
resin binder
IEC 60371-3-7
AMD 1-2006
云母基材绝缘材料.第 3 部
分:单项材料规范.活页 7:单
根导线缠绕带环氧树脂粘
的合聚脂薄膜云母纸.修改
件 1
Insulating materials based on mica - Part 3:
Specifications for individual materials -
Sheet 7: Polyester film mica paper with an
epoxy
resin binder for single conductor
taping; Amendment 1
IEC 60371-3-7
Corrigendum
1-1995
以云母为基材的绝缘材料.
第 3 部分:单项材料规范.活
页 7:单根导线缠绕用环氧
树脂粘合聚脂薄膜云母纸
Insulating materials based on mica - Part 3:
Specifications for individual materials
-
Sheet 7: Polyester film mica paper with an
epoxy
resin binder for single conductor
taping
IEC
60371-3-7-1995
以云母为基材的绝缘材料
第 3 部分:单项材料规范 活
页 7:单根导线缠绕用环氧
树脂粘合聚脂薄膜云母纸
Insulating materials based on mica - Part 3:
Specifications for individual materials
-
Sheet 7: Polyester film mica paper with an
epoxy
resin binder for single conductor
taping
IEC
60394-3-1-1976
电工用浸渍织物 第 3 部分:
单项材料规范 活页 1:油性
树脂漆棉底浸渍棉织物
(OR/C)
Varnished fabrics for electrical purposes.
Part 3 : Specifications for individual
materials. Sheet 1: Oleo
resinous
varnish-cotton base, OR/C
IEC
60394-3-2-1988
电工用浸渍织物 第 3 部分:
单项材料规范 活页 2:以环
氧、聚氨酯、有机硅、聚酯、
沥青或油性树脂漆浸渍的
玻璃漆
Varnished fabrics for electrical pu
rposes.
Part 3: Specifications for individual
materials. Sheet 2 : Glass-fibre based
varnished fabrics with epoxy, polyurethane,
silicone, polyester, bituminous or
IEC
60454-3-11-2007
电工用压敏粘带.第 3 部分:
单项材料规范.活页11:带玻
璃长丝、纤维素皱纹纸、聚
酯非织布、环氧树脂和压敏
粘合
Pressure-sensitive adhesive tapes for
electrical purposes - Part 3: Specifications
for individual materials - Sheet 11: Polyester
film combinations with glass filament,
creped cellulosic paper, polyester
non-woven, epoxy and pressure-sensitive
adhesive
IEC
60454-3-2-2006
电工压敏胶带.第 3 部分:单
项材料规范.活页 2:涂热固
性橡胶或丙烯酸类树脂交
联粘合剂的聚酯薄膜胶带
Pressure
-sensitive adhesive tapes for
electrical purposes
- Part 3: Specifications
for individual materials - Sheet 2: Polyester
film tapes with rubber thermosetting or
acrylic crosslinked adhesivesIEC
60455-1-1998
电气绝缘用无溶剂可聚合
树脂 第 1 部分:定义和一般
要求
Resin based reactive compounds used for
electrical insulation - Part 1: Definitions and
general requirements
IEC
60455-2-1998
电气绝缘用无溶剂可聚合
树脂 第 2 部分:试验方法
Resin based reactive conpounds used for
electrical insulation - Part 2: Methods of test
IEC 60455-2-2
Corrigendum
1-1991
电气绝缘用无溶剂可聚合
树脂复合物规范.第 2 部分:
试验方法.电工用涂敷粉末
试验方法
Specification for solventless polymerisable
resinous compounds used for electrical
insulation. Part 2 : Methods of test. Test
methods for coating powders for electrical
purposes
IEC
60455-2-2-1984
电气绝缘用无溶剂可聚合
树脂复合物规范 第 2-2 部
分:试验方法 电工用涂敷
粉末试验方法
Specification for solventless polymerisable
resinous compounds used for electrical
insulation. Part 2 : Methods of test. Test
methods for coating powders for electrical
purposes
IEC
60455-3-1-2003
电气绝缘用树脂基活性复
合物.第 3 部分:单项材料规
范.活页 1:未加填料的环氧
树脂复合物
Resin based reactive compounds used for
electrical insulation - Part 3: Specifications
for individual materials; Sheet 1: Unfilled
IEC
60455-3-11-1988
电气绝缘用无溶剂可聚合
树脂复合物规范 第 3 部分:
单项材料规范 活页 11:环
氧树脂涂敷粉末
Specification for solventless polymerisable
resinous compounds used for electrical
insulation. Part 3: Specifications for
individual materials. Sheet 11 : Epoxy
resin-based coating powders
IEC
60455-3-2-2003
电气绝缘用树脂基复合物.
第 3 部分:单项材料规范.活
页 2:填石英的环氧树脂复
合物
Resin based reactive compounds used for
electrical insulation - Part 3: Specifications
for individual materials; Sheet 2: Quartz
filled epoxy
resinous compounds
IEC
60455-3-3-2003
电气绝缘用树脂基复合物.
第 3 部分:单项材料规范.活
页 3:未加填料的聚氨酯复
合物
Resin based reactive compounds used for
electrical insulation - Part 3: Specifications
for individual materials; Sheet 3: Unfilled
polyurethane compounds
IEC
60455-3-4-2003
电气绝缘用树脂基复合物.
第 3 部分:单项材料规范.活
页 4:加填料的聚氨酯复合
物
Resin based reactive compounds used for
electrical insulation - Part 3: Specifications
for individual materials; Sheet 4: Filled
polyurethane compounds
IEC
电气绝缘用树脂基活性化
Resin based reactive compounds used for 60455-3-5-2006
合物.第 3 部分:单项材料规
范.活页 5:不饱和聚酯基浸
渍树脂
electrical insulation - Part 3: Specifications
for individual materials - Sheet 5:
Unsaturated polyester based impregnating
IEC
60893-1-2004
绝缘材料.电工用热固性树
脂工业硬质层压片.第 1 部
分:定义、名称和一般要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 1:
Definitions, designations and general
requirements
IEC
60893-2-2003
电工用热固性树脂工业硬
质层压片.第 2 部分:试验方
法
Industrial rigid laminated sheets based on
thermosetting
resins for electrical purposes -
Part 2: Methods of test
IEC
60893-3-1-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-1
部分:专用材料规范.对工业
硬质层压片类型的要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 3-1:
Specifications for individual materials;
Requirements for types of industrial rigid
laminated sheets
IEC
60893-3-2-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-2
部分:专用材料规范.对环氧
树脂硬质层压片的要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 3-2:
Specifications for individual materials;
Requirements for rigid laminated sheets
IEC
60893-3-3-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-3
部分:专用材料规范.对三聚
氰胺树脂硬质层压片的要
求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes
- Part 3-3:
Specifications for individual materials;
Requirements for rigid laminated sheets
IEC
60893-3-4-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-4
部分:专用材料规范.对酚醛
树脂硬质层压片的要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 3-4:
Specifications for individual materials;
Requirements for rigid laminated sheets
IEC
60893-3-5-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-5
部分:专用材料规范.对聚酯
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 3-5: 树脂硬质层压片的要求
Specifications for individual materials;
Requirements for rigid laminated sheets
based on polyester
resins
IEC
60893-3-6-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-6
部分:专用材料规范.对硅树
脂硬质层压片的要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 3-6:
Specifications for individual materials;
Requirements for rigid laminated sheets
IEC
60893-3-7-2003
绝缘材料.电工用热固性树
脂工业硬质层压片.第 3-7
部分:专用材料规范.对聚酰
亚胺树脂基刚性层压片的
要求
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes
- Part 3
-7:
Specifications for individual mate
rials;
Requirements for rigid laminated sheets
based on polyimide
resins
IEC
61212-1-2006
绝缘材料.电工用热固性树
脂基工业刚性圆形层压管
和棒.第 1 部分:定义、名称
与符号、一般要求
Insulating materials - Industrial rigid round
laminated tubes and rods based on
thermosetting
resins for electrical purposes
-
Part 1: Definitions, designation and general
requirements
IEC
61212-2-2006
绝缘材料.电工用热固性树
脂工业硬质圆形层压管和
棒.第 2 部分:试验方法
Insulating materials - Industrial rigid round
laminated tubes and rods based on
thermosetting
resins for electrical purposes -
Part 2: Methods of test
IEC
61212-3-1-2006
绝缘材料.电工用热固性树
脂基工业刚性圆形层压管
和棒.第 3 部分:单项材料规
范.活页 1:圆形层压轧制管
Insulating materials - Industrial rigid round
laminated tubes and rods based on
thermosetting
resins for electrical purposes -
Part 3: Specifications for individual
materials - Sheet 1: Round laminated rolled
tubes
IEC
61212-3-2-2006
绝缘材料.电工用基于热固
树脂的工业刚性圆形层压
管材和杆材.第 3 部分:单项
材料规范.活页 2:圆形层压
模制管材
Insulating materials - Industrial rigid round
lamineted tubes and rods based on
thermosetting
resins for electrical purposes
-
Part 3: Specifications for individual
materials - Sheet 2: Round laminated
moulded tubes
IEC
61212-3-3-2006
绝缘材料.电工用热固性树
脂工业硬质圆形层压管和
棒.第 3 部分:单项材料规范.
Insulating materials - Industrial rigid round
laminated tubes and rods based on
thermosetting
resins for electrical purposes -活页 3:圆形层压模制棒
Part 3: Specifications for individual
materials - Sheet 3: Round laminated
moulded rods
IEC
62011-1-2002
绝缘材料.电气设备用工业
刚性模制矩形和六边形横
截面的热固性树脂基薄壁
管材和棒材.第 1 部分:定义,
命名和一
Insulating materials - Industrial, rigid,
moulded, laminated tubes and rods of
rectangular and hexagonal cross-section
based on thermosetting
resins for electrical
purposes - Part 1: Definitions, designations
and general requirements
IEC
62011-2-2004
绝缘材料.电气设备用工业
刚性模制矩形和六角形横
截面的热固性树脂基叠层
管材和棒材.第 2 部分:试验
方法
Insulating materials - Industrial, rigid,
moulded, laminated tubes and rods of
rectangular and hexagonal cross-section,
based on thermosetting
resins for electrical
purposes - Part 2: Methods of test
IEC
62011-3-1-2003
绝缘材料.电气设备用基于
热固性树脂的矩形和六边
形横截面的工业刚性模制
层压管材和杆材.第 3-1 部
分:单项材料
Insulating materials - Industrial rigid
moulded laminated tubes and rods of
rectangular and hexagonal cross-section
based on thermosetting
resins for electrical
purposes - Part 3-1: Specifications for
individual materials - Tubes and rods of
rectangular and hexagonal cross-section
IEC/TR
60893-4-2003
绝缘材料.电工用热固性树
脂基绝缘刚性层压薄板.第
4 部分:代表值
Insulating materials - Industrial rigid
laminated sheets based on thermosetting
resins for electrical purposes - Part 4:
Typical values
ISO 10082-1999
塑料
酚醛树脂
分类和试
验方法
Plastics
- Classification
and test methods
ISO 1017-2006
褐炭和褐煤.可溶苯萃取物
中丙酮可溶物("树脂状物
质")的测定
Brown coals and lignites - Determination of
acetone-soluble material ("
resinous
substance") in the benzene-soluble extract
ISO 10283-2007
涂料和清漆用粘合剂.异氰
酸酯树脂中单节显性二异
氰酸盐的测定
Binders for paints and varnishes -
Determination of monomeric di
isocyanates
ISO 10467-2004
压力和无压力排水和排污
塑料管道系统
.基于不饱和
聚酯树脂的玻璃增强热固
性塑料(GRP)系统
Plastics piping systems for pressure and
non
-pressure drainage and sewerage
-
Glass
-reinforced thermosetting plastics
(GRP) systems based on unsaturated
1060-1-1998
塑料 氯乙烯的均聚物和共
聚物树脂 第 1 部分:命名体
系和基本规范
Plastics - Homopolymer and copolymer
resins of vinyl chloride - Part 1: Designation
system and basis for specifications
ISO
1060-2-1998
塑料 氯乙烯的均聚物和共
聚物树脂 第 2 部分:试样的
制备和性能的测定
Plastics
- Homopolymer and copolymer
- Part 2: Preparation
of test samples and determination of
properties
ISO 10618-2004
碳纤维
.树脂浸渍纱拉伸性
能的测定
Carbon fibre
- Determination of tensile
-impregnated yarn
ISO 10639-2004
压力和无压力给水塑料管
道系统
.基于不饱和聚酯树
脂的玻璃增强热固性塑料
(GRP)系统
Plastics piping systems for pressure and
non
-pressure water supply
-
Glass
-reinforced thermosetting plastics
(GRP) systems based on unsaturated
ISO 1068-1975
塑料 聚氯乙烯(PVC)树脂
压实的表观容积密度的测
定
Plastics; PVC
resins; Determination of
compacted apparent bulk density
ISO 11027-1993
胡椒和胡椒油树脂 胡椒碱
含量的测定 高效液相色谱
法
Pepper an pepper oleo
resins; determination
of piperine content; method using
high-performance liquid chromatography
ISO 11401-1993
塑料
酚醛树脂
用液相色
谱法分离
Plastics; phenolic
resins; separation by
liquid chromatography
ISO 11402-2004
酚醛树脂、氨基树脂和缩合
树脂.游离甲醛含量的测定 Phenolic, amino and condensation
resins
-
Determination of free-formaldehyde content
ISO 11409-1993
塑料 酚醛树脂 用差示扫
描量热法测定反应热及温
度
Plastics; phenolic
resins; determination of
heats and temperatures of reaction by
differential scanning calorimetry
ISO 11667-1997
纤维增强塑料 模塑料和预
浸料
树脂、增强纤维和矿
物质填料含量的测定
溶解
法
Fibre-reinforced plastics - Moulding
compounds and prepregs
- Determination of
resin, reinforced-fibre and mineral
-filler
content - Dissolution methods
ISO 11668-1997
色漆和清漆用粘合剂
氯化
聚合物树脂 通用试验方法
Binders for paints and varnishes
-
Chlorinated polymeriza
- General
methods of test
ISO 11908-1996
色漆和清漆用粘合剂
胺基 树脂 一般试验法 Binders for paints and varnishes
- Amino
resins - General methods of testISO 11909-2007
色漆和清漆用粘合剂
.聚亚
安酯树脂.通用试验方法
Binders for paints and varnishes
-
- General methods of
test
ISO
12215-1-2000
小艇 船体结构和尺寸 第1
部分:材料:热固性树脂、玻
璃纤维增强材料、基准层压
板
Small craft - Hull construction and
scantlings - Part 1: Materials: Thermosetting
resins, glass-fibre reinforcement, reference
laminate
ISO 1264-1980
塑料 氯乙烯均聚物和共聚
物树脂 水萃取物的 pH 值
测定
Plastics; Homopolymer and copolymer
resins of vinyl chloride; Determination of
pH of aqueous extract
ISO 1265-2007
塑料.聚氯乙烯树脂.杂质和
外来微粒数量的测定
Plastics - Poly(vinyl chloride)
resins -
Determination of number of impurities and
foreign particles
ISO
1268-7-2001
纤维增强塑料 试验板的制
备方法 第 7 部分：树脂传
递模塑法
Fibre-reinforced plastics - Methods of
producing test plates - Part 7: Resin transfer
moulding
ISO 1269-2006
塑料.氯乙烯的均聚物和共
聚物树脂.挥发性物质(包括
水分)的测定
Plastics - Homopolymer and copolymer
resins of vinyl chloride - Determination of
volatile matter (including water)
ISO 13685-1997
姜及姜的含油树脂 主要刺
激成分
(辛辣味和生姜酚
)
含量的测定
高效液相色谱
法
Ginger and its oleo
resins - Determination of
the main pungent components (gingerols
and shogaols) - Method using
high-performance liquid chromatography
ISO 13781-1997
外科植入物用聚
L-交酯树
脂及制品 体外降解试验
Poly(L
-lactide)
resins and fabricated forms
for surgical implants
- In vitro degradation
testing
ISO 14654-1999
钢筋混凝土用环氧树脂涂
层钢
Epoxy-coated steel for the reinforcement of
concrete
ISO 14655-1999
预应力混凝土用环氧树脂
涂层钢绞线
Epoxy-coated strand for the prestressing of
concrete
ISO 14656-1999
钢筋混凝土用环氧树脂涂
层钢的环氧树脂粉末和密
封材料
Epoxy powder and sealing material for the
coating of steel for the reinforcement of
concrete
ISO 14848-1998
塑料
.不饱和聚酯树
脂.130
℃时反应特性测定
Plastics
- Unsaturated-polyester
resins
-
Determination of reactivity at 130 °CISO 15034-1999
复合材料
预浸料 树脂流
动的测定
Composites
- Prepregs - Determination of
ISO
15252-1-1999
塑料 环氧树脂模塑化合物
(EP-PMCs) 第 1 部分:命名
体系及基本规范
Plastics
- Epoxy powder moulding
compounds (EP
-PMCs) - Part 1:
Designation system and basis for
specifications
ISO
15252-2-1999
塑料 环氧树脂模塑化合物
(EP-PMCs) 第 2 部分:试样
的准备和特性的测定
Plastics
- Epoxy powder moulding
compounds (EP
-PMCs) - Part 2: Preparation
of test specimens and determination of
properties
ISO
15252-3-1999
塑料 环氧树脂模塑化合物
(EP-PMCs) 第 3 部分:对所
选模塑化合物的要求
Plastics
- Epoxy powder moulding
compounds (EP
-PMCs) - Part 3:
Requirements for selected moulding
compounds
ISO 15840-2004
船舶和海上技术.用于海上
设备的热固性树脂纤维管
道和装置的标准规范
Ships and marine technology - Standard
specification for thermosetting
resinfibreglass pipe and fittings to be used for
marine applications
ISO 1624-2001
塑料 氯乙烯均聚物和共聚
物树脂 水中筛析
Plastics - Vinyl chloride homopolymer and
copolymer
resins - Sieve analysis in water
ISO
1628-2-1998
用毛细管粘度计测定稀溶
液中聚合物的粘度 第 2 部
分:聚氯乙烯树脂
Determination of the viscosity of polymers
in dilute solution using capillary
viscometers - Part 2: Poly(vinyl chloride)
ISO 1675-1985
塑料 液态树脂 比重瓶法
测定密度
Plastics; Liquid
resins; Determination of
density by the pyknometer method
ISO 17558-2006
钢丝绳
.套接法
.熔融金属和
树脂套接
Steel wire ropes
- Socketing procedures
-
Molten metal and
resin socketing
ISO 18280-2005 塑料.环氧树脂.试验方法
Plastics - Epoxy
resins - Test methods
ISO 21048-2004
塑料
.环氧树脂
.1,2-乙二醇
含量的测定
Plastics
- Determination of
1,2-glycol content
ISO 2114-2000
塑料(聚酯树脂)、色漆和清
漆(胶粘剂) 部分酸值和总
酸值的测定
Plastics (polyester
resins) and paints and
varnishes (binders) - Determination of
partial acid value and total acid value
ISO 21318-2007 塑料.环氧树脂.测定水树脂 Plastics - Epoxy
resins - Determination of 萃取物电导率
electrical conductivity of aqueous
resinextracts
ISO
21627-1-2002
塑料.环氧树脂.氯含量的测
定.第 1 部分:无机氯
Plastics; Epoxy
resins - Determination of
chlorine content - Part 1: Inorganic chlorine
ISO
21627-2-2002
塑料.环氧树脂.氯含量的测
定.第 2 部分:易皂化氯
- Determination of
chlorine content - Part 2: Easily saponifiable
chlorine
ISO
21627-3-2002
塑料.环氧树脂.氯含量的测
定.第 3 部分:总氯
Plastics; Epoxy
resins - Determination of
chlorine content - Part 3: Total chlorine
ISO 22498-2005
塑料.氯乙烯均聚物和共聚
物树脂.采用机械筛分的粒
度测定
Plastics - Vinyl chloride homopolymer and
copolymer
resins - Particle size
determination by mechanical sieving
ISO 2535-2001
塑料 不饱和聚酯树脂室温
时胶凝时间的测量
Plastics
- Unsaturated-polyester
resins
-
Measurement of gel time at ambie
nt
temperature
ISO 2554-1997
塑料 不饱和聚酯树脂 羟
基值的测定
Plastics - Unsaturated polyester
resins -
Determination of hydroxyl value
ISO 2555-1990
塑料.液态或象乳胶或分散
体一样的树脂.布洛克菲文
德粘度(RV)的测定
Plastics;
resins in the liquid state or as
emulsions or dispersions; determination of
apparent viscosity by the Brookfield method
ISO 308-1994
塑料 酚醛模塑材料 丙酮
可溶性物质(在未模塑状态
时表现树脂含量)的测定
Plastics - Phenolic moulding materials -
Determination of acetone-soluble matter
(apparent
resin content of material in the
unmoulded state)
ISO 3219-1993
塑料 液态或乳态或分散状
的聚合物/树脂 使用规定
剪切率的旋转式粘度计测
定粘度
Plastics; polymers/
resins in the liquid state
or as emulsions or dispersions;
determination of viscosity using a rotational
viscometer with defined shear rate
ISO 3521
Technical
Corrigendum
1-2003
塑料.不饱和聚酯树脂和环
氧树脂.总体积收缩量的测
定.技术勘误 1
Plastics - Unsaturated polyester and epoxy
resins - Determination of overall volume
shrinkage - Technical Corrigendum 1
ISO 3521-1997
塑料 不饱和聚酯和环氧树
脂 总体积收缩率的测定
Plastics
- Unsaturated polyester and epoxy
resins - Determination of overall volume
shrinkageISO
3597-1-2003
纺织玻璃纤维增强塑料.无
捻粗纱增强树脂棒力学性
能的测定.第 1 部分:棒材的
一般考虑和制备
Textile-glass-reinforced plastics -
Determination of mechanical properties on
rods made of roving
1: General considerations and preparation of
rods
ISO
3597-2-2003
纺织玻璃纤维增强塑料.无
捻粗纱增强树脂棒力学性
能的测定.第 2 部分:弯曲强
度的测度
Textile-glass-reinforced plastics -
Determination of mechanical properties on
rods made of roving-reinforced
resin - Part
2: Determination of flexural strength
ISO
3597-3-2003
纺织玻璃纤维增强塑料.无
捻粗纱增强树脂棒力学性
能的测定.第 3 部分:压缩强
度的测定
Textile-glass-reinforced plastics -
Determination of mechanical properties on
rods made of roving-reinforced
resin - Part
3: Determination of compressive strength
ISO
3597-4-2003
纺织玻璃纤维增强塑料.无
捻粗纱增强树脂棒力学性
能的测定.第 4 部分:表观层
间剪切强度的测定
Textile-glass-reinforced plastics -
Determination of mechanical properties on
rods made of roving
4: Determination of apparent interlaminar
shear strength
ISO
3672-1-2000
塑料 不饱和聚酯树脂 第1
部分:命名体系
Plastics - Unsaturated-polyester
resins
(UP-R) - Part 1: Designation system
ISO
3672-2-2000
塑料 不饱和聚酯树脂 第2
部分:试样的制备和特性的
测定
Plastics - Unsaturated-polyester
resins
(UP-R) - Part 2: Preparation of test
specimens and determination of properties
ISO
3673-1-1996
塑料 环氧树脂 第 1 部分:
命名
Plastics - Epoxy
resins - Part 1 : Designation
ISO
3673-2-2007
塑料.环氧树脂.第 2 部分:试
样制备和性能测定
Plastics
- Epoxy
resins - Part 2: Preparation
of test specimens and determination of
properties
ISO 4574-1978
塑料 通用聚氯乙烯(PVC)
树脂 热增塑剂吸收率测定
Plastics; PVC
resins for general use;
Determination of hot plasticizer absorption
ISO
4586-1-2004
装饰用高压叠层板材
(HPL).热固性树脂制薄板.
第 1 部分:分类和规范
High-pressure decorative laminates - Sheets
made from thermosetting
resins - Part 1:
Classification and specifications
ISO
4586-2-2004
装饰用高压叠层板材
(HPL).热固性树脂制薄板.
第 2 部分:性能测定
High-pressure decorative laminates - Sheets
made from thermosetting
resins - Part 2:
Determination of propertiesISO
4597-1-2005
塑料.环氧树脂用固化剂和
促进剂.第 1 部分:命名
Plastics - Hardeners and accelerators for
epoxy
resins - Part 1: Designation
ISO 4608-1998
塑料 一般用途氯乙烯均聚
物和共聚物树脂 室温下增
塑剂吸收的测定
Plastics
- Homopolymer and copolymer
resins of vinyl chloride for general use
-
Determination of plasticizer absorption at
room temperature
ISO 4610-2001
塑料 氯乙烯均聚物和共聚
物树脂 用空气喷射筛滤器
进行筛析
Plastics - Vinyl chloride homopolymer and
copolymer
resins - Sieve analysis using
air-jet sieve apparatus
ISO 4615-1979
塑料 不饱和聚酯和环氧树
脂 总氯量的测定
Plastics; Unsaturated polyesters and epoxide
resins; Determination of total chlorine
content
ISO 4895-1997
塑料 液态环氧树脂 结晶
性的测定
Plastics - Liquid epoxy
resins -
Determination of tendency to crystallize
ISO 4901-1985
以不饱和聚酯树脂为基体
的强化塑料 剩余苯乙烯单
体含量的测定
Reinforced plastics based on unsaturated
polyester
resins; Determination of residual
styrene monomer content
ISO 5833-2002
外科植入物.丙烯酸树脂粘
接剂
Implants for surgery - Acrylic
resin cements
ISO 584-1982
塑料 不饱和聚酯树脂
80℃时的反应性测定(常规
方法)
Plastics; Unsaturated polyester
resins;
Determination of reactivity at 80 degrees C
(conventional method)
ISO 6401-1985
塑料 氯乙烯均聚物和共聚
物树脂 剩余氯乙烯单体的
测定 气相色谱法
Plastics; Homopolymer and copolymer
resins of vinyl chloride; Determination of
residual vinyl chloride monomer; Gas
chromatographic method
ISO
6744-1-1999
色漆和清漆用粘合剂 醇酸
树脂 第 1 部分:通用试验方
法
Binders for paints and varnishes - Alkyd
resins - Part 1: General methods of test
ISO
6744-2-1999
色漆和清漆用粘合剂 醇酸
树脂 第 2 部分:邻苯二甲酸
酐含量的测定
Binders for paints and varnishes - Alkyd
resins - Part 2: Determination of phthalic
anhydride content
ISO
6744-3-1999
色漆和清漆用粘合剂 醇酸
树脂 第 3 部分:非皂化物含
量的测定
Binders for paints and varnishes - Alkyd
resins - Part 3: Determination of
unsaponifiable matter contentISO
6744-4-1999
色漆和清漆用粘合剂 醇酸
树脂 第 4 部分:脂肪酸含量
的测定
Binders for paints and varnishes - Alkyd
resins - Part 4: Determination of fatty acid
content
ISO 7142-2007
色漆和清漆用粘合剂.环氧
树脂.通用试验方法
Binders for paints and varnishes - Epoxy
resins - General methods of test
ISO 7327-1994
塑料 环氧树脂用固化剂和
促进剂 酸酐中游离酸测定
Plastics - Hardeners and accelerators for
- Determination of free acid
in acid anhydride
ISO
7543-1-1994
辣椒和辣椒油树脂 辣椒素
总含量的测定 第 1 部分:光
谱法
Chillies and chilli oleo
resins -
Determination of total capsaicinoid content -
Part 1: Spectrometric method
ISO
7543-2-1993
辣椒和辣椒油树脂 辣椒素
总含量的测定 第 2 部分:高
效液相色谱方法
Chillies and chilli oleo
resins; determination
of total capsaicinoid content; part 2: method
using high-performance liquid
chromatography
ISO 8619-2003
塑料.酚醛树脂粉.在加热玻
璃板上流动距离的测定
Plastics
- Phenolic
resin powder -
Determination of flow distance on a heated
glass plate
ISO 8974-2002
塑料.酚醛树脂.用气体色谱
法测定残余酚的含量
Plastics
- Phenolic
resins - Determination of
residual phenol content by gas
chromatography
ISO 8975-1989
塑料 酚醛树脂 pH 值的测
定
Plastics; phenolic
resins; determination of
pH
ISO 8987-2005
塑料.酚醛树脂.在B-转变试
验板上的活化性能的测定
Plastics - Phenolic
resins - Determination of
reactivity on a B-transformation test plate
ISO 8988-2006
塑料.酚醛树脂.六次甲基四
胺含量的测定.凯氏法、过
氯酸法和氯化氢盐酸法
Plastics
- Phenolic
resins - Determination of
hexamethylenetetramine content
- Kjeldahl
method, perchloric acid method and
hydrochloric acid method
ISO 8989-1995
塑料 液态酚醛树脂 水溶
物的测定
Plastics - Liquid phenolic
resins -
Determination of water miscibility
ISO 9396-1997
塑料 酚醛树脂 使用自动
装置对规定条件下酚醛树
脂凝胶时间的测定
Plastics - Phenolic
resins - Determination of
the gel time of resols under specific
conditions using automatic apparatus
ISO 9771-1995
塑料 酚醛树脂 在酸性条
Plastics - Phenolic
resins - Determination of 件处理时液体酚醛树脂假
绝热温升的测定
the pseudo-adiabatic temperature rise of
liquid resols when cured under acid
conditions
ISO 9944
Technical
Corrigendum
1-1997
塑料 酚醛树脂 树脂萃取
物电导率的测定 技术勘误
1
Plastics - Phenolic
resins - Determination of
electrical conductivity of
resin extracts;
Technical Corrigendum 1
ISO 9944-1990
塑料 酚醛树脂 树脂萃取
物电导率的测定
Plastics; phenolic
resins; determination of
electrical conductivity of
resin extracts
ISO/TR
10465-2-2007
基于非饱和聚酯树脂的柔
性玻璃纤维增强管材的地
下安装.第 2 部分:静态计算
方法的比较
Underground installation of flexible
glass-reinforced pipes based on unsaturated
polyester
resin (GRP-UP) - Part 2:
Compar
ison of static calculation methods
ISO/TR
10465-3-2007
基于非饱和聚酯树脂的柔
性玻璃纤维增强管材
(GRP-UP)的地下安装.第 3
部分:安装参数和应用限值
Underground installation of flexible
glass-reinforced pipes based on unsaturated
polyester
resin (GRP-UP) - Part 3:
Installation parameters and application
limits
ISO/TS
10465-1-2007
基于非饱和聚酯树脂
(GRP-UP)挠性玻璃加强管
的地下装置.第 1 部分:安装
规程
Underground installation of flexible
glass-reinforced pipes based on unsaturated
polyester
resin (GRP-UP) - Part 1:
Installation procedures
编号
中文名称
英文名称
